Instrument Setup - Leica TP1020 Instructions For Use Manual

8

12


11 (not visible)
Fig. 10b
Leica TP1020
9

13

14
15
10
• Remove the wooden ledge (8) sideways from the
interior box (9).
• Remove the interior box (9) in an upward move-
ment.
• To lift up the instrument (using 2 persons), take it
by the reagent container platform or by the lower
end of the housing (see Fig. 10b,"" "" below) and
lift it from the base plate (10).
• Install the instrument on a stable laboratory bench.
Four rollers (11) under the instrument housing
permit rotating the instrument on the bench.
• Remove the sponge rubber transport safety device
(12) from under the carousel cover (13).
• Depending on the instrument version, 4 foam
transport anchors (14) may have to be removed
between the Plexiglas plates (15).
When transporting the instrument, do NOT
lift it up by the carousel cover!
For safe transport of the instrument, we rec-
ommend keeping the original packaging.
4.

Instrument Setup

27