If you want to change any vehicle
control settings, select Keyless
Memory Settings™ by pressing
either INFO button (▲/▼), then
press the SEL/RESET button. Select
CHG SETTING, then press the SEL/
RESET button.
If you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page 99.
U.S. model is shown.
Refer to the table on the following
pages about the settings you want to
customize.
2010 ZDX
Multi-Information Display
DRIVER'S ID
Press the SEL/RESET
button.
CONTINUED
95