Table of Contents
Advertisement
If the indicator comes on at any other
time, there is a problem with the
CMBS. You will also see a ''CHECK
CMBS SYSTEM'' message on the
multi-information display. If this
happens, take your vehicle to a
dealer, and have it checked. For
more information, see page 498.
When this indicator is on, the CMBS
is not working.
Blind Spot Information
System (BSI) Indicator
On models with blind spot
information system (BSI)
This indicator normally comes on for
a few seconds when you select the
ON mode by operating the engine
start/stop button (see page 194).
The BSI indicator also comes on if
the rear bumper becomes dirty while
driving. You will see a ''BLIND SPOT
NOT AVAILABLE'' message on the
multi-information display.
When you clean the rear bumper, the
indicator should go off after you
begin driving again.
When you turn the system on, the
indicator will turn off.
2010 ZDX
Instrument Panel Indicators
If the indicator comes on at any other
time, there is a problem with BSI.
You will also see a ''CHECK BLIND
SPOT SYSTEM'' message on the
multi-information display. If this
happens, take your vehicle to a
dealer, and have it checked (for more
information, see page 518).
When this indicator is on, BSI is not
working.
75
Advertisement
Table of Contents
