Table of Contents
Advertisement
Mirrors
Adjusting the Power Mirrors
SELECTOR SWITCH
ADJUSTMENT SWITCH
1. Turn the ignition switch to the ON
(II) position.
2. Move the selector switch to L
(driver's side) or R (passenger's
side).
178
3. Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
4. When you finish, move the
selector switch to the center (off)
position. This turns the adjustment
switch off to keep your settings.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON mode is the equivalent of
ON (II). See page
196
for ignition
switch and power mode comparison.
2010 ZDX
Reverse Tilt Door Mirror
Both outside door mirrors have a
reverse tilt feature. When in reverse,
the selected mirror will tilt down
slightly to improve your view as you
parallel park. Shifting out of reverse
will return the mirror to its original
position.
To tilt the driver's mirror, place the
●
selector switch in the left position.
To tilt the passenger's mirror,
●
place the switch in the right
position.
To turn the feature off, place the
●
switch in the center position.
Outside mirror positions can be
stored in the driving position
memory system (see page 180).
Advertisement
Table of Contents
