Table of Contents
Advertisement
Playing a USB Flash Memory Device (Models with navigation system)
To Play a USB Flash Memory
Device
This audio system can select and
play the audio files on a USB flash
memory device with the same
controls used for the disc player. To
play a USB flash memory device,
connect it to the USB adapter cable
in the console compartment, then
press the USB/AUX button until you
see ''USB'' in the display. The power
mode must be ACCESSORY or ON.
Your vehicle has the engine start/
stop button instead of an ignition
switch. For more information to
select the power mode, see page 194.
350
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
ꭧ
AAC
formats. The USB flash
memory device limit is up to 500
folders or up to 15000 files.
ꭧ : Only AAC format files recorded
with iTunes are playable on this
audio unit.
The recommended USB flash
memory devices are 256 MB or
higher, and formatted with the FAT
file system. Some digital audio
players may be compatible as well.
Some USB flash memory devices
(such as devices with security
lockout features, etc.) will not work
in this audio unit.
2010 ZDX
NOTE:
Do not use a device such as a card
●
reader or hard drive as it or your
files may be damaged.
Do not connect your USB flash
●
memory device using a hub.
Do not use an extension cable to
●
the USB adapter cable equipped
with your vehicle.
Do not keep a USB flash memory
●
device in the vehicle. Direct
sunlight and high heat will damage
it.
We recommend backing up your
●
data before playing a USB flash
memory device.
Some devices cannot be powered
●
or charged via the USB adapter, if
this is the case use the accessory
adapter to supply power to your
device.
Advertisement
Table of Contents
