New Function - Yamaha DCD1+PS Operation Manual

New Function

Internal XG Tone Generator
By upgrading the Control Unit version, you can
enjoy 480 instrumental voices (plus 11 drum kits)
in comparison to the 128 instrumental voices
(plus 11 drum kits) in the current version.
Playing the Keyboard with an
Ensemble Voice
1
During playback or in Stop mode,
press [VOICE].
VOICE
The VOICE indicator lights and the
following display appears.
2
Use the [–/NO] and [+/YES]
buttons to select a voice number.
–/NO
The voice name and number change
accordingly.
Setting the voice to "##" produces no sound
from the internal XG tone generator for the
piano parts.
3
Press [>], then use the [–/NO] and
[+/YES] buttons to select a bank.
+/YES
–/NO +/YES
The bank number of the selected voice
appears temporarily in place of the Vol
parameter. The bank number automatically
returns to 0 when the voice number is
changed.
The number of selectable banks varies depending
on the voice number. There are several voices that
are only for bank number 0, and selections other
than "Bnk=000" cannot be made in this voice.
4
To adjust the volume, press [>]
until the c cursor is next to the
Vol parameter, then use the
[–/NO] and [+/YES] buttons to set
a value.
Note: In Voice mode, the volume of the parts
you play on the keyboard is set by the
Vol parameter and is not affected by the
TG Master Balance function.
5
To cancel this function, press
[VOICE] again.
VOICE
–/NO +/YES
3