Table of Contents
Advertisement
Chapter 1
Getting Started
This chapter provides information on the new functions, Control Units and pianos compatible with the
DCD1+PS, notes on the types of CDs that can be used, and how to handle the supplied remote control.
Addition of New
Functions
In the DCD1+PS, the following new functions
have been added in comparison to the DCD1.
The following new functions are possible by
combining a Control Unit with the DCD1+PS.
PianoSmart compatible functions
• DCD1 Mode Switching
see "DCD1 Mode".
• PianoSmart Playback
• PianoSmart Recording
• CD Master Balance
• SPS Adjust
see Chapter 5 "Using the PianoSmart feature".
The following new functions are possible by
upgrading the Control Unit.
MTC Sync Playback and MTC Sync Recording
see Chapter 6 "Synchronization Using the MTC"
for details.
Internal XG Tone Generator
see page 3 for details.
• Playback/Track Tone Selection
• Tone Mode/Tone Selection
• Recording/Track Selection
Disk functions
see page 4 for details.
• Copy All Songs
• Delete All Songs
• Disk Copy FD, Memory Disk Copy Enable
• Disk Copy FD (2DD), FD (2HD) Copy Enable
Reset functions
see page 5 for details.
• Reset to Factory Initial Settings
Note: The functions may already be incorporated for
some Control Unit variations.
Applicable Control Unit
In the DCD1+PS, PianoSmart Playback is
possible by combining with the following Control
Units. Check the model name of the Control Unit
that you are using.
• DKC50R, DKC500RWXG, DKC500RW,
DSR1, DKC55
DCD1+PS functions are possible by
upgrading the Control Unit.
• DKC500R, DKC500RXG
DCD1+PS functions are possible by
upgrading to the EMK1. For details,
consult your Yamaha piano dealer.
• Other Disklavier Controllers, Yamaha
GranTouch digital piano, Silent Series piano,
MIDIPiano, Clavinova digital piano, or some
other digital pianos
DCD1+PS functions are enabled by
connecting the DSR1. For details, consult
your Yamaha piano dealer.
1
Advertisement
Table of Contents
