Rear Panel - Yamaha DCD1+PS Operation Manual

Rear Panel

OUT IN
MIDI
3
4
1
DC IN
Connect the supplied AC adaptor here.
2
ANALOG MIDI IN R/L
You can connect audio instruments such as a CD
changer here for continuous playback of multiple
CDs.
3
MIDI OUT
Connect to the MIDI IN connector on your piano
to enable MIDI data from the DCD1+PS to be
output from your piano.
When using the PianoSmart function, the control
data required for PianoSmart playback is also
output.
4
MIDI IN
Used to connect external MIDI equipment for
inputting MIDI data to the piano when the MIDI
IN connector on the piano side is already being
used. In this case, however, the DCD1+PS must
be turned on and be in the Stop mode.
When using the PianoSmart function, connecting
to the MIDI OUT connector on the piano allows
the piano's Control Unit to be used for control of
the DCD1+PS.
1
DC-IN 12V
+ –
R L/L+R R
AUX IN
OUTPUT
5
2
ANALOG MIDI IN
R
L/L+R VOLUME
6 7
5
OUTPUT
Used to output audio signals from the DCD1+PS
to your piano or to other audio instruments.
If you don't connect to the R connector, both the
L and R channel signals will be mixed and output
from the L connector.
6
AUX IN
Used to connect external audio instruments.
If you don't connect to the R connector, the audio
signal input to the L connector will be output from
the L and R OUTPUT connectors.
7
VOLUME knob
Used to fine-adjust the volume of the audio
signals received by the AUX IN connector.
8
PIANO TYPE
Used to set the DCD1+PS to match your piano.
L
PIANO TYPE
Dkv
GT10
GT1
Clavinova
8
11