Inventory; Site Considerations - Grizzly G0449 Owner's Manual

Inventory

The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box 1: (Figure 5)
A. Drum Sander .............................................. 1
B. Control Panel .............................................. 1
C. Handwheel ................................................. 1
D. Top Cover ................................................... 1
A
D
Figure 5. G0449/G0450 inventory.
Tools (Not Shown)
—Hex Wrenches 4, 5mm .............................1 Ea
—Wrench 12/14 ................................................. 1
—Phillips Head Screwdriver .............................. 1
—Tension Tools ................................................. 2
—Rubber Plates (Dust Scoop) .......................... 2
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Model G0449/G0450 (Mfd. Since 8/13)
Floor Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some residential floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
Qty
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figure 6 for the minimum
working clearances.
B
C

Site Considerations

68"
Figure 6. Minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
50 / "
1
2
-15-