Introduction; Machine Description; Contact Info; Manual Accuracy - Grizzly G0449 Owner's Manual

Machine Description

A drum sander is used to remove surface material
from stock using a looping abrasive belt, which is
required when preparing a workpiece.
After the workpiece is placed on the conveyor,
it moves forward and is pressed down slightly
by the front pressure roller. Then the front and
rear sanding drums remove material from the
workpiece surface. Finally, the operator receives
the workpiece at the back of the sander.
The table height handwheel is used to control
cutting depth. Also, a variable speed knob allows
the operator to adjust the conveyor speed for the
specific type of workpiece and finish.

Contact Info

We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
-2-

INTRODUCTION

Manual Accuracy

We are proud to provide a high-quality owner's
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
contained inside. Sometimes we make mistakes,
but our policy of continuous improvement also
means that sometimes the machine you receive
will be slightly different than what is shown in
the manual.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure, check our website
for an updated version. We post current manuals
and manual updates for free on our website at
www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, please write down the
Manufacture Date and Serial Number stamped
into the machine ID label (see below). This infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Model G0449/G0450 (Mfd. Since 8/13)