Subaru 2004 IMPREZA Service Manual page 9

20) Set the stopper to gear box, and then insert the
tip of ST to gear box.
(1) Stopper
(2) Oil seal
21) By fixing the 2-surface width, press in by rotat-
ing the rod and attach to oil seal.
(1) Rod
(2) 2-surface width
Steering Gearbox [RHD MODEL]
PS-00070
PS-00071
PS-53
POWER ASSISTED SYSTEM (POWER STEERING)
22) While fixing the 2-surface width, pull out the oil
seal by rotating nut.
CAUTION:
Take care not to scratch the gear box inner sur-
face.
(1) 2-surface width
(2) Nut
D: ASSEMBLY
1) Apply a coat of grease to inside and outside of
new oil seal.
Specified steering grease:
VALIANT GREASE M2 (Part No. 003608001)
2) Verify the oil seal direction and installation posi-
tion. Using the ST and press, press fit the oil seal to
gear box.
ST 34199AE130 GEARBOX OIL SEAL IN-
STALLER
(1) Oil seal
PS-00072
PS-00073