Subaru 2004 IMPREZA Service Manual page 30

POWER ASSISTED SYSTEM (POWER STEERING)
B: INSTALLATION
1) Temporarily tighten the two bolts fixing pipe C
and D. (bolt A for Non-turbo model.)
NOTE:
Visually check that the hose between tank and pipe
D is free from bending or twisting.
• NON-TURBO MODEL
(1)
(1) Bolt A
(2) Pipe C
(3) Pipe D
• TURBO MODEL
(1)
(1) Bolt
(2) Pipe C
(3) Pipe D
(1) Connect the pipe D to oil tank.
(2) Using a new gasket, connect the pipe C to
oil pump.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
(3) Tighten the two bolts fixing pipe C and D.
(bolt A for Non-turbo model.)
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
Pipe Assembly [RHD MODEL]
(2)
(3)
PS-00432
(2)
(3)
PS-00433
PS-74
2) Install the coolant filler tank. (Turbo model)
Tightening torque:
T1: 19 N·m (1.9 kgf-m, 13.7 ft-lb)
T2: 21 N·m (2.1 kgf-m, 15.2 ft-lb)
T1
T2
PS-00118