Subaru 2004 IMPREZA Service Manual page 10

POWER ASSISTED SYSTEM (POWER STEERING)
3) Attach the steering body to ST as shown in the
figure. Apply a coat of grease to needle bearing.
ST 926200000 STAND
CAUTION:
Ensure the needle bearing is free from defects.
If it is faulty, replace the steering body with a
new one.
(1) Steering body
4) Using the ST·B and ST·C, attach the oil seal to
ST·A.
ST 927490000 INSTALLER A, B, C
NOTE:
Face the oil seal in direction shown in the figure.
ST B
ST C
(A) Oil seal
Steering Gearbox [RHD MODEL]
PS-00074
ST A
(A)
PS-00075
5) Insert the ST·A with oil seal assembled, through
gear side of rack. Remove the oil seal from ST·A
near piston, and then remove the ST·A from rack.
(A) Oil seal
(B) Rack
(C) Piston
6) Install the back-up washer from gear side of
rack.
(1) Oil seal
(2) Back-up washer
(3) Rack
PS-54
(C)
(B)
ST A
(A)
PS-00076
PS-00077