Subaru 2004 IMPREZA Service Manual page 29

6) Non-turbo model
(1) Remove the air cleaner.
(2) Remove the bolt A.
(3) Disconnect the pipe C from oil pump. Dis-
connect the pipe D from return hose.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1)
(1) Bolt A
(2) Pipe C
(3) Pipe D
Pipe Assembly [RHD MODEL]
(2)
(3)
PS-00432
PS-73
POWER ASSISTED SYSTEM (POWER STEERING)
7) Turbo model
(1) Remove the air cleaner.
<Ref. to IN(H4DOTC)-7, REMOVAL, Air Clean-
er.>
(2) Remove the coolant filler tank.
(3) Remove the two bolts fixing pipe C and D.
(4) Disconnect the pipe C from oil pump. Dis-
connect pipe D from return hose.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1)
(1) Bolt
(2) Pipe C
(3) Pipe D
PS-00114
(2)
(3)
PS-00433