Dome Camera Iii; Appearance Description - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera
3. After connecting the video cable and power cable, view the image of the camera on a monitor.
Loosen the fixed screws, and adjust the panning position and tilting position to get optimum
surveillance angle. Adjust W-T lever and F-N lever to get a perfect image.
4. Tighten the screw after adjustment, and reinstall the lower dome to finish the installation.

3.3 Dome Camera III

3.3.1 Appearance Description

Camera description:
Route Cable through side outlet
Figure 3-11
Reinstall the Lower Dome
Figure 3-12
19