HIKVISION DS-2CD883F-E Installation Manual page 40

Installation Manual of Network Camera
4. Rotate the toggle to remove it from the toggle bolt; insert the bolt into the toggle bolt hole on
the dome module and use the screw driver to rotate the bolt slightly but not tightly; Reinstall
the toggle and push the dome module to the mounting hole on the ceiling with toggle bolts
aligned with the screw holes on the ceiling.
5. Fasten the toggle bolt and the toggle will automatically secure the dome module to the ceiling.
Remove the Lower Dome
Figure 3-38
Toggle
Bolt
Mount the Camera
Figure 3-39
33
Ceiling