HIKVISION DS-2CD883F-E Installation Manual page 62

Installation Manual of Network Camera
5. Connect the network cable and power cable; reinstall the right cover and fixator.
Note: If you need to pull the cable through the side cable outlet of the camera, pull the cables
from the slot without reinstall the fixator.
6. Adjust Image.
1) View the image of the camera over the network.
2) Loosen the packing nut 1 to adjust the panning position and tilting position.
3) Fasten the packing nut 1.
4) Loosen the packing nut 2 to rotate the camera.
5) Fasten the packing nut 2.
Secure the Camera
Figure 5-11
Slot
Figure 5-12
Reinstall
55