HIKVISION DS-2CD883F-E Installation Manual page 32

Installation Manual of Network Camera
5. Fasten the lock screws to secure the dome camera.
6. Remove the lower dome and connect the RCA analog video output with a monitor to view the
image of the camera. Loosen the lens set screw and pan, tilt or rotate the lens to get a desired
surveillance angle. Adjust the lens focus to obtain a perfect image. Fasten the lens set screw.
Safety rope
Safety rope
Figure 3-23
Lock screw
Secure the Camera
Figure 3-24
Adjust the Image
Figure 3-25
25