Prestigio GeoVision 4500 Manual page 22

Autorouting
Route to the selected mark on the map
You can set a route to any mark on the map. This mark will be the end point of your
route while the start will be in your current location. To create a route, create a mark
by pressing a map in the necessary place[1]. Then press the «Cursor» and the "Go
to" button In the appeared panel(2). The route is created[3].
1
Route from one user point on map to other
If you want to create a route from one mark on map to another, you should do the
following: create a mark on map[1], set this button as a start route point by pressing
"Cursor" - «Start». If you didn't turn off your GPS receiver, the system will ask you to
do it[3]. The start point will be marked by green flag[4]. Then find the end route
point. tap on map and press "Cursor" · "Go to"[5]. The route will be created from one
point to another.
1
4
2
2
5
EN-22
3
3
6