Initiating An Ati Session - Paradyne 7510-A2-GB20-00 727 User Manual

Using the Asynchronous Terminal Interface

Initiating an ATI Session

Î
2-2
The user interface is blank until activated. Press Return to activate the user
interface. The first time you do this the Main Menu screen is displayed.
main
Device Name:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions
Entry to all of the DSU's tasks begins at the Main Menu screen, which has four
menus or branches.
Select . . . To . . .
Status View results of diagnostic tests, network status of interfaces, statistics,
LEDs, and DSU identity information.
Test Select and cancel tests for the DSU's interfaces.
Configuration Display and edit the configuration options.
Control Establish identification for the DSU and system, or to initiate a power-up
reset of the DSU.
March 1997
MAIN MENU
Status
Test
Configuration
Control
Model: 7510
Î Î
Exit
7510-A2-GB20-00