Water Connection - Siemens DO05705 Installation & Operating Instruction

Water connection

Caution!
The existing fitting may not be covered with scaling.
Do not grease the thread!
Info: Replacement for damaged threaded nozzles available
from customer service.
A2
B2
18
en
Undersink appliances DO05705, DO05755,
DO05755K, DO3170D5, DO3175D5 and
DO05705CH
Fit the taps if required ( A1 and A2).
Insert the seals ( B1).
Ensure the axial fit of the connection pipes in the nozzles.
Place the union nuts on the thread and tighten them by
hand (B2).
Tighten the screw fitting ( C). Counter the threaded noz-
zles on the warm water heater with a wrench
After the unit has been used to heat water a few times,
retighten the screw fitting.
A1
B1
C