Table of Contents
Advertisement
Knowing your vehicle
Placing a passenger safety
belt into the auto lock mode
The use of the auto lock mode will
1
ensure that the normal movement of
the child in the vehicle does not
2
cause the safety belt to be pulled out
and loosen the firmness of its hold
on the child restraint system. To
3
secure a child restraint system, use
the following procedure.
4
5
6
7
8
9
3
48
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on
the outboard or center rear seats, do
the following:
1. Place the child restraint system in
the seat and route the lap/shoul-
der belt around or through the
restraint, following the restraint
manufacturer's instructions. Be
sure the safety belt webbing is not
twisted.
E2MS103005
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis-
tinct "click" sound.
Position the release button so that it
is easy to access in case of an
emergency.
E2BLD310
Advertisement
Table of Contents
