Table of Contents
Advertisement
Driving your vehicle
1
2
3
4
Automatic operation
5
The automatic climate control sys-
tem is controlled by simply setting
the desired temperature.
6
The Full Automatic Temperature
Control (FATC) system automatically
7
controls the heating and cooling sys-
tem as follows;
8
1. Push the AUTO button. It is indi-
cated by AUTO on the display. The
9
modes, fan speeds, air intake and
air-conditioning will be controlled
automatically by temperature set-
ting.
4
76
2. Turn the TEMP knob to set the
desired temperature.
If the temperature is set to the
lowest setting Lo (17°C/62°F), the
air conditioning system will oper-
ate continuously.
3. To turn the automatic operation
off, press any button except tem-
perature control knob and AQS
button. If you press the mode
selection button, air-conditioning
1KMA2139
button, defrost button, air intake
control button or fan speed knob,
the selected function will be con-
trolled manually while other func-
tions operate automatically.
Regardless of the temperature set-
ting, when using automatic opera-
tion, the air conditioning system will
automatically turn on to decrease the
humidity inside the vehicle, even if
the temperature is set to warm.
✽ NOTICE
Never place anything over the sen-
sor located on the instrument panel
to ensure better control of the heat-
ing and cooling system.
1KMA2140
Advertisement
Table of Contents
