Table of Contents
Advertisement
Knowing your vehicle
1
2
3
4
2. Insert the tongue plate (A) into the
5
open end of the buckle (C) until an
audible "click" is heard, indicating
the latch is locked. Make sure the
6
belt is not twisted.
7
8
9
3
40
1KMN3442
3. Pull the tongue plate (B) and
insert the tongue plate (B) into the
open end of the buckle (D) until an
audible "click" is heard, indicating
the latch is locked. Make sure the
belt is not twisted.
There will be an audible "click" when
the tab locks in the buckle. The safe-
ty belt automatically adjusts to the
proper length only after the lap belt is
adjusted manually so that it fits snug-
ly around your hips, if you lean for-
ward in a slow, easy motion, the belt
will extend and let you move around.
If there is a sudden stop or impact,
the belt will lock into position. It will
also lock if you try to lean forward too
quickly.
1KMB3443
WARNING
When using the rear safety cen-
ter belt, you must lock all
tongue plates and buckles. If
any tongue plate or buckle is
not locked, it will increase the
chance of injury in the event of
collision.
Advertisement
Table of Contents
