Table of Contents
Advertisement
➀ ➁
➂ ➃
Automatic climate control sys-
tem
To defog inside windshield
1. Select desired fan speed.
2. Select desired temperature.
3. Press the defrost button (
4. The outside (fresh) air position is
automatically selected.
If the outside (fresh) air position are
not selected automatically, press the
corresponding button manually.
➀ ➁
➂ ➃
1KMA2153
To defrost outside windshield
1. Set fan speed to the highest
(extreme right) position.
2. Set temperature to the extreme
hot (HI) position.
3. Press the defrost button (
).
4. The outside (fresh) air position is
automatically selected.
Driving your vehicle
CAUTION
Do not use the
tion during cooling operation in
extremely humid weather. The
difference between the tempera-
ture of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility. In this case, set the
mode selection knob to the
1KMA2154
position and fan speed control
knob to the lower speed.
).
or
posi-
1
2
3
4
5
6
7
8
9
4 89
Advertisement
Table of Contents
