Table of Contents
Advertisement
Driving your vehicle
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
1
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set
2
the mode to the floor-defrost posi-
tion.
3
• Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
4
all side windows.
• Clear all snow and ice from the
5
hood and air inlet in the cowl grill to
improve heater and defroster effi-
ciency and to reduce the probabili-
6
ty of fogging up inside of the wind-
shield.
7
8
9
4
90
Defogging logic
Manual climate control system
To reduce the probability of fogging
up the inside of the windshield, the
air intake control is set to the outside
(fresh) air position automatically if
any of following occur.
• The mode is selected to the
or
while the system is
activated.
• The ignition switch is turned on
while the mode is selected to the
,
or
.
• The ignition switch is turned off.
• The fan is off.
• The fan begins to be operated.
Press the air intake control button to
select the recirculated air position
while the ignition switch is on.
,
How to cancel or return defogging
logic of manual climate control system
1. Turn the ignition switch to the "ON"
position.
2. Turn the mode selection knob to
the defrost position (
3. Push the air intake control button
(
) at least 5 times within 3 sec-
onds.
1KMN2155
).
Advertisement
Table of Contents
