Phase Detection - Sony A6300 User Manual

The position of the focus range finder frame cannot be changed during movie shooting.
[67] How to Use
Phase detection AF
When there are phase detection AF points within the auto focus area, the product uses the
combined autofocus of the phase detection AF and contrast AF.
Note
When the F-value is set to F13 or more, you cannot use the phase detection AF. Only
contrast AF is available.
Phase detection AF is available only when an applicable lens is attached. If you use a
lens that does not support focal plane phase detection AF, you cannot use [Automatic
AF], [ AF Track Sens] or [
Also, even if you use a previously purchased applicable lens, the phase detection AF
might not function unless you update the lens.
[68] How to Use
Center Lock-on AF
When you press the center button, the camera detects the subject positioned in the center of
the screen and continues to track the subject.
1. MENU →
2. Align the target frame (A) over the subject and press
wheel.
Press again to stop tracking.
If the camera loses track of the subject, it can detect when the subject reappears on
the monitor and resume tracking.
Using shooting functions
AF drive speed].
Using shooting functions
(Camera Settings) → [Center Lock-on AF] → [On].
Adjusting the focus
Adjusting the focus
in the center of the control