Disp. Cont. Af - Sony A6300 User Manual

AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an A-
mount lens with the Mount Adaptor LA-EA2 or LA-EA4 (sold separately).
1. Select MENU →
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. The larger the value you select, the
farther the autofocused position will be from the product. The smaller the value you
select, the closer the autofocused position will be to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered
value appears on the screen. [±0] appears for lenses for which a value has not yet been
registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered and no new
lens can be registered. To register a new lens, attach a lens for which the registration can
be erased, and set its value to [±0], or reset the values of all the lenses using [Clear].
The [AF Micro Adj.] supports Sony, Minolta, or Konica-Minolta lenses. If you perform [AF
Micro Adj.] with lenses other than the supported lenses, the registered settings for the
supported lenses may be affected. Do not perform [AF Micro Adj.] with an unsupported
lens.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-Minolta lens of
the same specification.
[84] How to Use
Disp. cont. AF area
You can set whether or not to display the area that is in focus when [Focus Area] is set to
[Wide] or [Zone], in [Continuous AF] mode.
1. MENU →
Menu item details
(Custom Settings) → [AF Micro Adj.].
Using shooting functions
(Custom Settings) → [Disp. cont. AF area] → desired setting.
Adjusting the focus