The Product Does Not Work Properly; Warning Messages - Sony A6300 User Manual

The camera settings may be reset if the battery pack is ejected while the power is on.
When ejecting the battery pack, first turn the power off and check that the access lamp is
not illuminated before ejecting.
[368] Troubleshooting

The product does not work properly.

Turn off the product. Remove the battery pack and insert it again. If the product is hot,
remove the battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord.
Connect the power cord and turn on the product again. If the product repeats the same
error often or still does not work after trying these solutions, consult your Sony dealer or
local authorized Sony service facility.
[369] Troubleshooting

Warning messages

Set Area/Date/Time.
Set the area, date and time. If you have not used the product for a long time, charge the
internal rechargeable backup battery.
Power insufficient.
The cleaning mode will not operate when the remaining battery charge is less than
(3). We recommend using the AC Adaptor AC-PW20 when using cleaning mode.
Unable to use memory card. Format?
The memory card was formatted on a computer and the file format was modified. Select
[Enter], and then format the memory card. You can use the memory card again, however,
all previous data in the memory card is erased. It may take some time to complete the
format. If the message still appears, change the memory card.
Memory Card Error
An incompatible memory card is inserted.
Formatting has failed. Format the memory card again.
Unable to read memory card. Reinsert memory card.
Troubleshooting
Messages Messages
Others