Sony A6300 User Manual page 22

1. Eye sensor
2. Viewfinder
3. Eyepiece cup
Not attached to the camera at the factory. It is recommended that you attach the
eyepiece cup when you intend to use the viewfinder.
Attaching/removing the eyepiece cup
Match the bottom side of the eyepiece cup to the viewfinder, and attach it by pushing
the top side of the eyepiece cup in.
To remove the eyepiece cup, grasp it on the left and right sides and pull it down.
Remove the eyepiece cup when you attach an accessory (sold separately) to the
Multi Interface Shoe.
4. Monitor
You can adjust the monitor to an easily viewable angle and shoot from any position.
You may not be able to adjust the monitor angle depending on the type of a tripod
you use. In such a case, release the tripod screw once to adjust the monitor angle.
5. Diopter-adjustment dial
Adjust the diopter-adjustment dial to your eyesight until the display appears clearly in
the viewfinder. If it is difficult to turn the diopter-adjustment dial, remove the eyepiece
cup and then adjust the dial.