Exposure Set - Sony A6300 User Manual

Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/Custom1/Custom2:
Adjusts the brightness level.
Hint
You can register multiple values for [Zebra] to check the exposure and the flare as well as
the brightness level. The settings for exposure confirmation and flare confirmation are
registered to [Custom1] and [Custom2] respectively by default.
To check exposure, set a standard value and the range for the brightness level. The
zebra pattern will appear on areas that fall within the range you set.
To check flare, set a minimum value for the brightness level. The zebra pattern will appear
on areas that exceed the value you set.
Note
The zebra pattern is not displayed during HDMI connection.
[100] How to Use
Exposure Set. Guide
You can set whether to display a guide when you change the exposure.
1. MENU →
Menu item details
Off:
Does not display the guide.
On:
Displays the guide.
[101] How to Use
Using shooting functions
(Custom Settings) → [Exposure Set. Guide] → desired setting.
Using shooting functions
Adjusting the exposure
Adjusting the exposure