Phase Detection Af - Sony ILME-FX30 Help Manual

[Tracking: Expand Spot]
If you assign [Focus Standard] to the center of the multi-selector beforehand, you can move the focusing frame back
to the center of the monitor by pressing the center of the multi-selector.
Hint
When [ Focus Area] is set to [Spot] or [Expand Spot], you can move the focusing frame over a greater distance at a time with
the multi-selector by setting [
You can move the focusing frame quickly by touching and dragging it on the monitor. Set [Touch Operation] to [On], and set
[Touch Func. in Shooting] to [Touch Focus] beforehand.
To track the subject temporarily when shooting still images (Tracking On)
You can temporarily change the setting for [
to which you have assigned [Tracking On] in advance. The [
will switch to the equivalent [Tracking] setting.
For example:
[ Focus Area] before you activate [Tracking On]
[Wide]
[Spot: S]
[Expand Spot]

Phase detection AF

When there are phase detection AF points within the auto focus area, the product uses the combined autofocus of the
phase detection AF and contrast AF.
Note
Phase detection AF is available only when a compatible lens is attached. If you use a lens that does not support phase detection
AF, you cannot use the following functions.
[Automatic AF]
[AF Tracking Sensitivity]
[AF Subj. Shift Sensitivity]
[AF Transition Speed]
Also, even if you use a previously purchased applicable lens, the phase detection AF might not function unless you update the
lens.
Related Topic
Selecting the focus method (Focus Mode)
Touch Operation
Focusing using touch operations (Touch Focus)
Adjusting the focus area settings to the camera's orientation (horizontal/vertical) (Switch V/H AF Area)
Registering the current focus area (AF Area Registration)
AF Frame Move Amt] to [Large].
Focus Area] to [Tracking] while you press and hold down the custom key
[
[Tracking: Wide]
[Tracking: Spot S]
[Tracking: Expand Spot]
Focus Area] setting before you activated [Tracking On]
Focus Area] while [Tracking On] is active
124