Sony A6300 User Manual page 39

[Display Quality]: [Standard]
The number for "Shooting (still images)" is based on the CIPA standard, and is for
shooting under the following conditions (CIPA: Camera & Imaging Products Association):
DISP: [Display All Info.]
Focus Mode: [Automatic AF]
One picture is taken every 30 seconds.
The flash strobes once for every two pictures.
The power is turned on and off once every ten times.
The number of minutes for movie shooting is based on the CIPA standard, and is for
shooting under the following conditions:
The image quality is set to XAVC S HD 60p 50M/50p 50M.
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by,
turning on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has
been reached, and then continued by pressing the MOVIE (Movie) button again. Other functions,
such as zooming, are not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[14] How to Use
Supplying power from a wall outlet (wall socket)
By using the supplied AC adaptor, you can shoot and playback images while the power is
supplied from a wall outlet (wall socket) without using up the battery power.
1. Insert the battery pack into the camera.
2. Connect the camera to the wall outlet (wall socket) with a micro USB cable (supplied)
and an AC adaptor (supplied).
Note
The camera will not activate if there is no remaining battery. Insert a sufficiently charged
battery pack into the camera.
If you use the camera while power is being supplied from a wall outlet (wall socket), make
sure that the icon (
Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If
you remove the battery pack, the camera will be turned off.
Do not remove the battery pack while the access lamp is lit. The data in the memory card
may be damaged.
As long as the power is on, the battery pack will not be charged even if the camera is
connected to the AC Adaptor.
Preparing the camera
) is displayed on the monitor.
Charging the battery pack