Network Setup - Intellinet 524803 Quick Install Manual

2. Connect your computer to the Ethernet port
on the right side panel of the router. NOTE:
It's recommended that you use a cable
connection through the Ethernet port for the
router's initial configuration. The PWR/CHG LED should be lighted
green and the Ethernet LED should be on if the computer or other
network device connected to the router's Ethernet port is turned on
and connected properly.

NetWork setuP

The following steps are for the preliminary network setup of the router
using a Web browser, which will make the router operational and ready
for advanced configuration based on procedures in the user manual.
NOTE: Screen images of other Windows operating systems are similar.
Some screen images have been modified to fit the format of this guide.
1. Set your computer to
obtain an IP address
from a wireless router:
Click "Start" (typically
located in the lower-
left corner of your PC),
then Control Panel;
double-click Network
Connections, then
double-click Local
Area Connection; and
lastly, on the Local
Area Connection
Status screen, click
"Properties."
6