Intellinet 524803 Quick Install Manual page 5

hardWare setuP/coNNectioNs
charging the battery
Before using the router, the battery needs to be charged. Charging the
battery takes about four hours.
1. Remove the battery
compartment cover
on the back of the
router, insert the
included battery, then
replace the cover, sliding it until the
latch snaps securely back in place.
2. Plug the included power adapter into
an AC outlet or an automobile's auxiliary
power outlet, then connect it to the mini USB
port on the router (DC In). While the router battery
is charging, the PWR/CHG LED lights orange, then turns green when
the router battery is fully charged.
3. On the left side panel, set the On/Off switch to
On. CAUTION: Always switch the router off
before removing the battery, and only use the
battery and power adapter included with the
router, as other types could be dangerous and damage the router.
Network connections
If needed, visit www.intellinet-network.com for a complete list of compatible
3G USB modems.
1. Connect your 3G / 3.5G USB
modem to the USB port on the
top panel of the router.
Cover
PWR/CHG
LED
USB port
Modem
Battery
DC
In
Power adapter
5