Cleaning The Rinse Arms; Cleaning The Wash Arms - Champion UH330 ADA Installation & Operation Manual

Cleaning
Rinse Arms
1. There are two rinse arms. They are interchangeable.
2. Remove the spindle
assembly and end plugs in each pipe and flush the rinse pipes.
3. Inspect the rinse arm bearings for wear and
replace as necessary.
4. Clean the rinse arm
nozzles with a small
paper clip.
5. Reassemble the rinse
arm assemblies.
Wash Arms
1. There are two interchangeable wash arms.
2. Flush the wash arms thoroughly in a sink.
3. Inspect the wash arm bearings for wear and
replace as necessary.
Rinse Arm
Bearing
Cleaning
Spindle
Assembly
End Plug
Nozzle
23