Champion UH330 ADA Installation & Operation Manual page 21

Heat recovery high temperature with built-in booster fresh water final rinse
Table of Contents

Advertisement

Installation
Chemical Connections (continued)
! VERY IMPORTANT !
ALWAYS USE A COMMERCIAL-GRADE NON-CHLORINATED DETERGENT.
PLACE THE CHEMICAL SUPPLY CONTAINERS AS CLOSE TO THE MACHINE AS POSSIBLE.
DO NOT ELEVATE THE CHEMICAL CONTAINERS ABOVE THE FINISHED FLOOR.
Chemical Injection Points
1. The detergent enters the wash tank compartment through a fitting at the
right rear of the wash compartment.
2. Rinse-aid enters the final rinse through a fitting in the front of the booster tank.
DETERGENT
INJECTION
POINT
RINSE-AID
INJECTION
POINT
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents