Champion UH330 ADA Installation & Operation Manual page 12

Installation
Connecting Incoming Power to the Main Terminal Block
for 1PH and 3PH Machines with Boosters
Refer to the photo below:
1. Remove the lower front dishwasher panel.
2. Remove the retaining fasteners (A) from the swing-out brackets and swing the
chemical pump bracket (B) and the chemical circuit board bracket (C) out of the way
as shown.
3. Remove the screw holding the main terminal block cover and set the cover aside.
B
4
A
A
C
Main Terminal Block Cover
(continued on next page)