HP 5130 EI series Configuration Manual page 18

IRF physical interface location and binding restrictions
Device model
•
HP 5130-24G-4SFP+ EI Switch
(JG932A)
•
HP 5130-24G-4SFP+ EI Brazil
Switch (JG975A)
•
HP 5130-24G-PoE+-4SFP+
(370W) EI Switch (JG936A)
•
HP 5130-24G-PoE+-4SFP+
(370W) EI Brazil Switch
(JG977A)
•
HP 5130-24G-SFP-4SFP+ EI
Switch (JG933A)
•
HP 5130-24G-2SFP+-2XGT EI
Switch (JG938A)
•
HP
5130-24G-PoE+-2SFP+-2XGT
(370W) EI Switch (JG940A)
•
HP 5130-48G-4SFP+ EI
Switch (JG934A)
•
HP 5130-48G-4SFP+ EI Brazil
Switch (JG976A)
•
HP 5130-48G-PoE+-4SFP+
(370W) EI Switch (JG937A)
•
HP 5130-48G-PoE+-4SFP+
(370W) EI Brazil Switch
(JG978A)
•
HP 5130-48G-2SFP+-2XGT EI
Switch (JG939A)
•
HP
5130-48G-PoE+-2SFP+-2XGT
(370W) EI Switch (JG941A)
Connecting IRF ports
When you connect two neighboring IRF members, connect the physical interfaces of IRF-port 1 on one
member to the physical interfaces of IRF-port 2 on the other.
Candidate IRF physical
interfaces
The four SFP+ ports on the front
panel.
The two SFP+ ports and the two
10GBASE-T ports on the front
panel.
The four SFP+ ports (in two
groups) on the front panel:
•
SFP+ ports 49 and 50 in one
group.
•
SFP+ ports 51 and 52 in the
other group.
The two SFP+ ports and the two
10GBASE-T ports on the front
panel.
The ports are grouped: SFP+ ports
in one group and the 10GBASE-T
ports in another group.
14
Requirements
No binding restrictions. You can bind
the four ports as needed to any IRF
ports.
No binding restrictions. You can bind
the four ports as needed to any IRF
ports.
If an IRF port contains multiple IRF
physical interfaces, the physical
interfaces must belong to the same
group.
Ports in a port group can be bound to
different IRF ports as IRF physical
interfaces.
If an IRF port contains multiple IRF
physical interfaces, the physical
interfaces must belong to the same
group.
Ports in a port group can be bound to
different IRF ports as IRF physical
interfaces.