Configuration Synchronization; Master Election - HP 5130 EI series Configuration Manual

Or:
<Master> cd slot3#flash:/
<Master> mkdir test
Creating directory slot3#flash:/test... Done.
To copy the file test.ipe on the master to the root directory of the flash memory on member device 3:
# Display the current working path. In this example, the current working path is the root directory of the
flash on member device 3.
<Master> pwd
slot3#flash:
# Change the current working path to the root directory of the flash memory on the master device.
<Master> cd flash:/
<Master> pwd
flash:
# Copy the file to member device 3.
<Master> copy test.ipe slot3#flash:/
Copy flash:/test.ipe to slot3#flash:/test.ipe?[Y/N]:y
Copying file flash:/test.ipe to slot3#flash:/test.ipe... Done.

Configuration synchronization

IRF uses a strict running-configuration synchronization mechanism. In an IRF fabric, all devices obtain
and run the running configuration of the master. Configuration changes are automatically propagated
from the master to the remaining devices. The configuration files of these devices are retained, but the
files do not take effect. The devices use their own startup configuration files only after they are removed
from the IRF fabric.
For more information about configuration management, see Fundamentals Configuration Guide.

Master election

Master election occurs each time the IRF fabric topology changes in the following situations:
The IRF fabric is established.
•
• The master device fails or is removed.
The IRF fabric splits.
•
Independent IRF fabrics merge.
•
NOTE:
Master election does not occur when two split IRF fabrics merge.
Master election selects a master in descending order:
1. Current master, even if a new member has higher priority.
When an IRF fabric is being formed, all members consider themselves as the master. This rule is
skipped.
2. Member with higher priority. If all members have the same priority, this rule is skipped.
3. Member with the longest system uptime.
6