13-2.Cassette Grille; 13-3.Others - Fujitsu AUXG18LRLB Technical Manual

13-2. Cassette grille
Exterior
13-3. Others
Exterior
Part name Model name
Cassette grille UTG-UKYA-W
Part name Model name
Human sensor
UTY-SHZXC
kit
External
UTY-XWZXZG
connect kit
Air outlet
UTR-YDZK
shutter plate
Wide panel UTG-AKXA-W
Panel spacer UTG-BKXA-W
Fresh-air intake
UTZ-VXRA
kit
Insulation for
UTZ-KXRA
high humidity
- 78 -
Summary
The form of grille discharges wind
away from the ceiling making it
difficult to leave dirt marks.
Wired remote controller (UTY-
RNRYZ1) is included.
Summary
Human sensor for cassette.
Use to connect with various
peripheral devices and air conditioner
PCB.
For control output port.
Installed at the air outlet when 3-
directions mode is performed.
Hides the gap between the ceiling
hole and the cassette grille.
If there is not enough height in the
ceiling space, by inserting this spacer
between the cassette grille and the
ceiling surface, the height of the unit
body goes into the ceiling space
become 50-mm lower.
By attaching Fresh-air intake kit to
the indoor unit, it can be taken in
fresh air of up to 10% of "high" air
volume of the indoor unit.
Install when the under-roof condition
is expected to be the humidity of over
80% and the temperature of over 30
°C.