Removing The Isodinamyk Car Seat - Foppapedretti IS0DINAMYK Manual

Removing the ISODINAMYK Car Seat

Pull
C
E
36
B
D
A
Rotate both adjuster levers (B) anti-
clockwise, about a half turn. Do not raise
the adjuster levers (B) completely because
otherwise, for safety reasons, the stirrups
won't extend.
While rotating the ISOFIX adjuster levers
(B), pull the ISODINAMYK car seat deta-
ching it from the backrest of the seat (C),
until complete extraction of the anchor
stirrups.
Slide the button recessed in the stirrup
(D), next to the green anchor indicator,
towards the car seat . Once you slide the
button the indicator (E) will turn red,
signifying the release of the anchor
stirrup. Repeat this operation on the
stirrups of both sides of the car seat.
At this point, the car seat is released and
can be removed from the seat.
Loosen the Top Tether
Strap (A) and release
the strap from its
anchor point.
Unhook the anchor
strap.
IS0DINAMYK