Foppapedretti IS0DINAMYK Manual page 47

Adjust the headrest so that when you lift up the headrest fabric you are able to see
the metal bar (E) through the backrest.
Slide the shoulder pads (F) over the shoulder harness straps (G), ensuring the seams
G
G
1
1
J
J
IS0DINAMYK
Replacing the harness
E
E
G
G
F
F
H
H
2
2
K
K
of the shoulder pads are facing outwards.
Push the shoulder pad and harness straps
through slots (1 & 2)on the head hugger
(H) (if fitted) and the headrest fabric. Lift
up the fabric and take the straps through
the shell over the metal bar (I).
ATTENTION: The shoulder pad and
harness straps MUST pass over the metal
bar, failure to do so will result in an
incorrect installation.
I
I
Connect the narrow shoulder pad straps to
the shoulder pad connector (J).
Connect the wider shoulder harness straps
to the yoke (K).
ATTENTION: Check that the harness
straps are correctly attached to the yoke
and ensure the straps are not twisted.
47