ParaBody 777 User Manual page 17

FIGURE 18
3/8 X 3" 67
3/8 X 3-3/4" 57
64
37
STEP 18:
• Securely assemble the ball end of the LEG CABLE (30) and one 3-1/2" PULLEY (37) to the LEG PEDESTAL (8) using two 3/8 X
3-3/4" BOLTS (57), two 3/8" X 1-1/16" FLANGE SPACERS (49), two 3/8" WASHERS (64), and two 3/8" LOCKNUTS (63).
(NOTE: The LEG CABLE (91) must be routed over the retaining bolt as shown in FIGURE 18.)
• Securely assemble one 3-1/2" PULLEY (37) to the UPRIGHT (2) using one 3/8 X 3" BOLT (67) and one 3/8" LOCKNUT (63).
(NOTE: The LEG CABLE (91) must be routed over the retaining bolt as shown in FIGURE 18.)
• Assemble one 3-1/2" PULLEY (37) to the BASE PLATES (11) using one 3/8 X 4-1/4" BOLT (68), two 3/8" SAE WASHERS (69),
two GUIDE CABLES (71), two 3/8 X 1" SPACERS (51) and one 3/8" LOCK NUT (63). See FIGURE 18.(Note: Loop the LEG
CABLE (30) around the PULLEY prior to assembling the PULLEY to the BASE PLATES.)
3/8 X 4-1/4" 68
8
49
30
63
2
17
51 37
69
11
71
63