Ops Gain Adjustment - Samsung GX-20 Service Manual

Hide thumbs Also See for GX-20:

Table of Contents

Ⅵ. ADJUSTMENT

5. OPS gain adjustment

【CAUTION 1】 This adjustment must be performed when replacing the T100 main circuit board, the

T640 relay board or the T970 circuit board.

【CAUTION 2】 This adjustment must be performed after the OPS adjustment (unit adjustment).

【CAUTION 3】 The adjustment must be performed on a rigid, stable and even area without vibration.

【CAUTION 4】 Handle the adjustment stage carefully, as it is heavy.

Do not touch the black vibration plate.

Preparation Equipment :

□ SR gain adjustment program (SR_GainForCS) for the GX-20

□ SR gain adjustment device for the GX10 (driving stage•controller•speed meter)

□ SR gain adjustment chart for GX10 (identical to the GX10)

□ PC (Windows XP (SP2), USB port standard device)

□ D-XENON 50-200 mm lens

□ AC adapter (or DC code for 76830)

1. Computer set-up

① 「NetFramework2.0」 and 「Visual C++Runtime2005」 must be installed on the PC already.

② The 77010 「SR_GainForCS」 folder must be copied onto the hard disk.

- This Document can not be used without Samsung's authorization -

Table of Contents