Ⅵ. ADJUSTMENT
③ Put the body on a stable support (table) downwards.
④ Check the CCD ID no. when replacing the T100 circuit board.
3. Adjustment procedure
① Start the PC.
② Connect the body to the PC using the USB cable and connect the AC adapter to the body. (power ON)
③ Check that the hot plug icon display is recognized on the PC.
④ Double click on the 「K20D SR Operation.exe」 file in the adjustment software folder and execute it.
⑤ The adjustment screen appears.
⑥ Click on the [Start] button.
79
- This Document can not be used without Samsung's authorization -