Adjustment
5-6 OB, AFE GAIN, ISO Adjustment (ADJ_04)
■ Adjust the CMOS characteristics. (BLACK, GAIN, ISO sensitivity)
<How to adjust>
1. Prepare the Light Source Box.
- Color Temperature : 5500K±100, Lv. 12
2. Change the setting on the tester mode as below.
- TEST MODE : Left → OK → Right → Ev + OK button at the same time.
- 3. Select ADJUSTMENT CONTROL.
- (2) LINE PROCESS STEP value is 04.
- (3) LINE PROCESS MARK value is 03.
3. Insert the SD card to the camera which contained adjustment data.
4. After combine the master lens to the camera, attached to the Light Source Box.
5. After turning on the camera, it will be start automatically.
6. After completing the adjustment, camera turned off automatically.
<Adjustment Result>
You can see the adjustment result by using Log File saved on the memory card. You can also confirm the
ADJUSTMENT RESULT on the Tester mode.
5-6
This Document can not be used without Samsung's authorization
Light source box
Camera
Fig. 5-5
SAMSUNG