Samsung GX-20 Service Manual page 260

Ⅵ. ADJUSTMENT
④ Mount the lens on the body of the camera.
⑤ Set the body as below.
• Mode dial 「M」
• AF change lever 「MF」
• OPS switch 「ON」
⑥ Mount the body of the camera onto the vibration plate.
⑥ Fix the camera firmly using the two knobs.
⑦ Locate the chart (■) on the center of the finder. (Within the spot metering frame.)
【Check】 Check again that the distance is 2.0mm.
Turn on the controller and turn the dial up to 1,000 rpm.
Turn off the controller after checking.
84
- This Document can not be used without Samsung's authorization -