Slr (Single Lens Reflex) Functional Section Adjustment - Samsung GX-20 Service Manual

6. SLR (Single Lens Reflex) functional section adjustment

IMPORTANT
【CAUTION 1】 This adjustment must be performed when replacing the T100 circuit board.
【CAUTION 2】 Each setting except for the custom function will be initialized when executing this
adjustment.
【CAUTION 3】 Adjust the shutter speed after adjusting the digital section.
See 「Shutter speed adjustment according to the histogram」 .
Preparation Equipment :
□ SLR adjustment program for 77010 (comprised of three types as below)
K20D PDCAdj (SLR adjustment except for the following),
K20D Uniformity CS (AF sensor uniformity adjustment),
K20D FI CS§§(AF focus adjustment
□ PC (Windows XP (SP2), USB port standard device)
□ USB cable
□ AC adapter (or DC code for the 76830)
□ Light source for the AE adjustment (LV6•LV8 (or 9)•LV12•LV15 (or 16), shutter tester)
□ Digital photometric standard lens (No.95901-D20, Lens ID No. attachment), F8 set ring
□ F5.6 set plate for photometric standard lens (No.95901-D20 only)
□ Side AF gradient adjustment tool (square)
□ AF gradient adjustment tool (cross)
□ Hexagonal driver 1.5mm (HD-M1.5)
- This Document can not be used without Samsung's authorization -
Ⅵ. ADJUSTMENT
89