Table of Contents
Advertisement
Sample DHCP settings:
System configuration
Go to System > Config to make the following changes to the DFL-1000 system configuration:
•
Setting system date and time
•
Changing web-based manager options
•
Adding and editing administrator accounts
•
Configuring SNMP
Setting system date and time
For effective scheduling and logging, the DFL-1000 time should be accurate. You can either manually set
the DFL-1000 time, or you can configure the DFL-1000 to automatically keep its time correct by
synchronizing with a Network Time Protocol (NTP) server.
For more information on NTP and to find the IP address of an NTP server that you can use, see
http://www.ntp.org.
To set the date and time from the web-based manager:
•
Go to System > Config > Time .
•
Click Refresh to display the current DFL-1000 date and time.
•
Select your Time Zone from the list.
•
Optionally, click Set Time and set the DFL-1000 date and time to the correct date and time.
•
To configure the DFL-1000 to use NTP, click Synchronize with NTP server.
•
Enter the IP address of a NTP server.
•
Specify how often the DFL-1000 should synchronize its time with the NTP server. A typical Syn
Interval would be 1440 minutes for the DFL-1000 to synchronize its time once a day.
•
Click Apply.
DFL-1000 User's Manual
100
Advertisement
Table of Contents
